FDBAES series – Đèn LED báo sự cố khẩn cấp chống cháy nổ (LED Self-contained Emergency Lighting)

FDBAES series là Đèn LED báo sự cố khẩn cấp chống cháy nổ (LED Self-contained Emergency Lighting), dùng để cung cấp ánh sáng, chỉ dẫn việc tiếp cận các lối thoát hiểm trong quá trình sơ tán trong môi trường nguy hiểm, phù hợp cho zone 1&2, zone 22, đạt chuẩn Ex d IIC / Ex tD A21

Hãng sản xuất: ATX/France
Model: FDBAES

Mô tả

Santex  tự hào là nhà phân phối ủy quyền các sản phẩm của hãng ATX/France tại Việt Nam về thiết bị điện & phụ kiện chống cháy nổ, trong đó có Đèn LED báo sự cố khẩn cấp chống cháy nổ (Explosion Proof LED Self-contained Emergency Lighting).

Dưới đây thể hiện các thông số kỹ thuật & thông tin cần thiết của Đèn LED báo sự cố khẩn cấp chống cháy nổ FDBAES series hãng ATX/France, giúp khách hàng hiểu và lựa chọn được sản phẩm phù hợp với điều kiện làm việc của mình hơn.

SELF-CONTAINED EMERGENCY LIGHTING FDBAES SERIES

Explosion Proof LED Self-contained Emergency Lighting FDBAES series

APPLICATION OF SELF-CONTAINED EMERGENCY LIGHTING FDBAES SERIES

  • Provides adequate lighting and/or visual indication of access on exit routes during an evacuation in a hazardous environment.
  • Can be installed in hazardous areas designated as Zone 1 and 2 – 21 and 22.
  • Typical applications include oil refineries, petrochemical plants, pulp and paper mills.

FEAURE OF SELF-CONTAINED EMERGENCY LIGHTING FDBAES SERIES

  • All versions:
  • Power supply 230 Vac, 50/60 Hz.
  • 1 hour duration (emergency).
  • Threaded access cover with O-ring seal.
  • Can be maintained in hazardous areas as an internal switch cuts off battery supply automatically once the cover is unscrewed and opened.
  • Battery pack.
  • Escape route lighting: 2.4 V – 1.5 Ah (2 cells – Nicd)

Space lighting: 7.2 V – 2.2 Ah (6 cells – NiMh) – Flameproof

  • Padlockable switch is available on switched models which individually cuts off power supply and remote control.
  • Charge indicator by 1 green LED (life time over 10 years).
  • Operates in any position.
  • Connection to plug-in terminal block via 2 x 5 x 2.5 mm2 (0.003 x 0.008 x 0.004 in2) terminals.
  • Supplied with two fixing lugs.
  • Automatic built-in self-test system (SATI) with memorization of tests indicated by LEDs.
  • Using a microprocessor and an internal clock, the unit will carry out automatic tests.
  • Weekly test: Lamp check during 6 seconds.
  • Quarterly test: Emergency operation and lamp check for 1 hour.
  • Can be remotely controlled and checked without switching the mains off with remote control unit from Legrand (Catalog Number 03901) or URA (Catalog Number 095448 and 095450) manufacturers.
  • The remote control unit installed in a safe area or inside a
  • flameproof box allows manual ignition of all the units (maximum 300 units) for visual inspection of their operation.
  • Escape route lighting: 55 lumens, 0.50 wattage.

Space lighting: 540 lumens, 0.95 wattage.

Addressable versions:

  • Operates without additional control lines. Communication between units and the control system is realized via mains borne signals that utilize the existing electrical wiring.
  • Standard control system capacity: one control system for up to 200 emergency lighting units.
  • Optional increased control system capacity: booster (repeater unit) is used to increase the length of the network allowing up to 1000 emergency lighting units to be on one control system. This allows for the use of a single computer to centralize the management of the facilities emergency lighting system. For more information, please contact your local sales representative.

STANDARD MATERIAL

  • End caps and cover: aluminum
  • O-ring seal: Nitrile
  • Lens: tempered borosilicate glass
  • Fixing brackets: zinc plated steel or 316 stainless steel
  • Accessories: white painted galvanized steel
  • Guard: zinc plated steel

OPTIONS

  • Addressable monitoring software, please consult your local sales representative.
  • Low temperature application, please consult your local sales representative.

ATEX/IECEx CERTIFICATIONS & COMPLIANCES

  • Certification Type: FLd

— Gas: Zone 1 – 2

– Conforming to ATEX 94/9/CE: II 2 G

– Type of Protection: Ex d IIC

– Temperature class: T6

— Dust: Zone 21 – 22

– Conforming to ATEX 94/9/CE: II 2 D

– Type of Protection: Ex tD A21

– Surface Temperature: T80 °C (T176 °F)

  • Ambient Temperature: -40 °C to +55 °C (-40 °F to +131 °F) 
  • CE Declaration of Conformity: 50203
  • ATEX Certificate: LCIE 97/ ATEX 6012
  • IECEx Certificate: IECEx LCI 04.0018
  • Index of Protection according EN/IEC 60529: IP66/68
  • Impact Resistance (shock): IK08
  • Internal Volume: > 2 dm3 (122 in³) – 2 liters
  • Conforming to NF AEAS

EURASEC CERTIFICATION

  • EURASEC N° TC RU C-FR.ГБ05.B.00912

OTHER CEFITICATION

  • INMETRO Certificate: BVC 11.0492 ‚

RELATED PRODUCTS

  • For labels see Labels for Emergency Lighting Units, ATX Self-Adhesive Signaling Labels for Emergency Lighting Units.

appleton-atx-lighting-fdbaes-self-contained-emergency-lighting-06-17-2

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “FDBAES series – Đèn LED báo sự cố khẩn cấp chống cháy nổ (LED Self-contained Emergency Lighting)”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *